Filter
Top Products
Controlling Your System at the Analog Ports 54
determined by placement of the device in the list. The list is always shown in
scanning order. You can, however, choose to display the device name or EID
number by pressing the appropriate button.
To add devices to the scan list:
1
Press <Print Screen>
to launch the OSCAR interface. The
Main
dialog
box appears.
2
Click
Setup - Scan
. The
Scan
dialog box displays.
Figure 3-12. Scan Dialog Box
3
The dialog box contains a list of all devices attached to your appliance.
Click the checkbox next to the devices you wish to scan.
or
Double-click on a device name or port.
or
Press <Alt> and the number of the device you wish to scan. You can select
up to 16 devices from the entire list.
4
In the
Time
box, type the number of seconds (from 3 to 99) of desired
time before the scan moves to the next device in the sequence.
5
Click
OK
.
To remove a device from the scan list: