Filter
Top Products
Understanding the Printer Menus 127
Wireless LAN
Purpose:
To enable the wireless connection.
Va lue s :
NOTE: For Dell C1760nw Color Printer, the factory default is Enable. For Dell C1660w Color Printer, the factory default is
Disable.
NOTE: When you use the USB connection and do not use the wireless connection, you need to disable the wireless LAN.
Wireless Status
Purpose:
To display the information on the wireless signal strength. No changes can be made on the operator panel to improve
the status of the wireless connection.
Va lue s :
NOTE: For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and Wireless LAN is
set to Enable.
NOTE: For Dell C1660w Color Printer, this item is displayed only when Wireless LAN is set to Enable.
Wireless Setup
Purpose:
To configure the wireless network interface.
Va lue s :
Enable Enables the wireless connection.
Disable Disables the wireless connection.
Good Indicates good signal strength.
Acceptable Indicates marginal signal strength.
Low Indicates insufficient signal strength.
No Reception Indicates that no signal is received.
Select Access Select the access point from the list.
WEP Key When you select an access point using WEP as the security method,
enter the WEP key. For 64bit keys, up to 10 hexadecimal characters
can be entered. For 128bit keys, up to 26 hexadecimal characters can
be entered.
PassPhrase
Entry
When you select an access point using WPA, WPA2, or Mixed as the
encryption type, enter the passphrase of 8 to 63 alphanumeric
characters.