Filter
Top Products
10. Remove the three M2.5 x 5-mm screws on the cover of the hard drive carrier.
11. Lift the cover up at an angle and remove.
12. Remove the four M2.5 x 5 screws from the hard drive bracket.
13. Lift the hard drive up at an angle and disconnect it from the hard drive carrier.
1
M2.5 x 5-mm screw
2
release latch carrier
3
hard drive carrier
1
cover
2
M2.5 x 5-mm screws (3)
3
hard drive carrier
1
hard drive carrier
2
M2.5 x 5-mm screws (4)
3
hard drive
4
hard drive bracket