Filter
Top Products
Back to Contents Page
RJ-11 Modem Connector
Dell™Latitude™E6400andE6400ATGand
MobileWorkstationPrecision™M2400ServiceManual
Removing the RJ-11 Modem Connector
Replacing the RJ-11 Modem Connector
Removing the RJ-11 Modem Connector
1. Follow the procedures in Before Working on Your Computer.
2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).
3. Remove the heatsink assembly (see Removing the Processor Heatsink Assembly).
4. Remove the hinge covers (see Removing the Hinge Covers).
5. Remove the modular drive (see Removing the Modular Drive).
6. Remove the display assembly (see Removing the Display Assembly (E6400 and M2400) or Removing the Display Assembly (E6400 ATG)).
7. Remove the LED cover (see Removing the LED Cover).
8. Remove the keyboard (see Removing the Keyboard).
9. Remove the right speaker grill (see Removing the Right Speaker Grill/Fingerprint Reader Assembly).
10. Remove the palm rest assembly (Removing the Palm Rest Assembly).
11. Remove the modem (see Removing the Modem).
12. Lift the RJ-11 modem connector out of the base assembly.
Replacing the RJ-11 Modem Connector
1. Place the RJ-11 modem connector into the base assembly, aligning the guides on the connector sides with the base.
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
RJ-11 modem connector
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.