Filter
Top Products
Back to Contents Page
Modular Drive
Dell™Latitude™E6400andE6400ATGand
MobileWorkstationPrecision™M2400ServiceManual
Removing the Modular Drive
Replacing the Modular Drive
The modular drive supports either a second hard drive, an optical drive, or a an air bay for travel.
Removing the Modular Drive
1. Follow the procedures in Before Working on Your Computer.
2. Turn your computer upside down.
3. If your computer has a security screw for the modular drive, remove the security screw.
4. Push the release latch in to release it.
5. Use the release latch to slide the drive out of the modular bay.
Replacing the Modular Drive
1. Slide the drive in the modular bay.
2. If your computer has a security screw for the modular drive, replace the security screw.
3. Follow the procedures in After Working on Your Computer.
Back to Contents Page
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTE: The security screw on the modular drive is optional and may not be installed on your computer.
1
security screw
2
modular bay
3
modular drive
4
release latch
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTE: The security screw on the modular drive is optional and may not be installed on your computer.