Filter
Top Products
Back to Contents Page
DC Power Cable
Dell™Latitude™E6400andE6400ATGand
MobileWorkstationPrecision™M2400ServiceManual
Removing the DC Power Cable
Replacing the DC Power Cable
Removing the DC Power Cable
1. Follow the instructions in Before Working on Your Computer.
2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).
3. Remove the hard drive (see Removing the Hard Drive).
4. Remove the modular drive (see Removing the Modular Drive).
5. Remove the hinge covers (see Removing the Hinge Covers).
6. Remove the heatsink assembly (see Removing the Processor Heatsink Assembly).
7. Remove the display assembly (see Removing the Display Assembly (E6400 and M2400) or Removing the Display Assembly (E6400 ATG)).
8. Remove the LED cover (see Removing the LED Cover).
9. Remove the keyboard (see Removing the Keyboard).
10. Remove the right speaker grill (see Removing the Right Speaker Grill/Fingerprint Reader Assembly).
11. Remove the palm rest assembly (see Removing the Palm Rest Assembly).
12. Remove the card cage (see Removing the Card Cage).
13. Remove the system board (see Removing the System Board Assembly). Do not remove the wireless mini-cards, memory modules, or processor from the
system board.
14. Unroute the DC power cable from the base assembly and remove it.
Replacing the DC Power Cable
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
DC power connector
2
DC cable