Filter
Top Products
Back to Contents Page
WLAN/WiMax Card
Dell™Latitude™E6400andE6400ATGand
MobileWorkstationPrecision™M2400ServiceManual
Removing the WLAN/WiMax Card
Replacing the WLAN/WiMax Card
Removing the WLAN/WiMax Card
1. Follow the procedures in Before Working on Your Computer.
2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).
3. Disconnect the antenna cables from the card.
4. Remove the M2 x 3-mm screw. The card will pop up at a 45-degree angle.
5. Slide the card out of the card connector on the system board.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTICE: Insert a WLAN or WiMax card only into the slot labeled WLAN/WiMax.
1
antenna cables (3)
2
WLAN/WiMax card
3
M2 x 3-mm screw
1
WLAN/WiMax card
2
card connector