Filter
Top Products
Replacing the Right Speaker Grill/Fingerprint Reader Assembly
1. Snap the right speaker grill into place on the palm rest.
2. If your computer has a fingerprint reader, connect the fingerprint reader cable. Press the length of the cable to secure it to the palm rest.
3. Replace the keyboard (see Replacing the Keyboard).
4. Replace the LED cover (see Replacing the LED Cover).
5. Turn the computer upside down, and tighten the two M2.5 x 5-mm screws in the modular bay.
6. Replace the modular drive (see Replacing the Modular Drive).
7. Follow the procedures in After Working on Your Computer.
Back to Contents Page
1
fingerprint reader cable (optional)
2
speaker grill
3
fingerprint reader (optional)
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE: If you are installing a new right speaker grill with a fingerprint reader, remove the backing from the fingerprint reader cable.