Back to Contents Page
Right Speaker Grill/Fingerprint Reader Assembly
Dell™Latitude™E6400andE6400ATGand
MobileWorkstationPrecision™M2400ServiceManual
Removing the Right Speaker Grill/Fingerprint Reader Assembly
Replacing the Right Speaker Grill/Fingerprint Reader Assembly
Removing the Right Speaker Grill/Fingerprint Reader Assembly
1. Follow the procedures in Before Working on Your Computer.
2. Remove the modular drive (see Removing the Modular Drive).
3. Remove the LED cover (see Removing the LED Cover).
4. Remove the keyboard (see Removing the Keyboard).
5. Turn the computer upside down, and loosen the two captive screws in the modular drive bay.
6. Turn the computer topside up and open the display.
7. If your computer has a fingerprint reader, disconnect the fingerprint reader cable, and peel it away from the palm rest.
8. Unsnap the right speaker grill, then lift it up from the palm rest.
NOTE: The fingerprint reader is optional and may not be installed on your computer.
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
captive screws (2)
2
modular drive bay
NOTE: The fingerprint reader is optional and may not be installed on your computer.