Filter
Top Products
54 Installing System Components
3
Open the system. See "Opening the System" on page 46.
4
If you are adding a new card, select the appropriate expansion card slot. See "Expansion Card
Installation Guidelines" on page 52.
5
Open the expansion-card retainer and remove the filler bracket. See Figure 3-8.
6
Install the expansion card:
a
Holding the card by its edges, position the card so that the card-edge connector aligns with the
expansion-card connector on the system board.
NOTICE: If you are installing a SAS RAID controller card, do not press on the memory module when installing the
card.
b
Insert the card-edge connector firmly into the expansion-card connector until the card is fully
seated.
c
Close the expansion-card retainer. See Figure 3-8.