Peripherals
4-3
PC Card
Your computer is equipped with a PC card (PCMCIA) slot, which can
accommodate one Type II card. Before inserting a PC card into your computer, see
its manual.
When using a PC card which needs an IRQ, disable one of the following ports:
Serial, IR, LPT, Modem, or Sound. Otherwise a PC card or the computer may
malfunction.
Never disable the USB port. Disabling the USB port in the Setup Utility
may cause some PC cards to malfunction.
Inserting a PC Card
1. Raise the PC card eject button and push it in. The protection card pops out.
2. Remove the protection card from the PC card slot.
3. Insert the card into the slot with the label face up until it locks into place. The
PC card eject button pops out. When the PC card is fully inserted, fold down
the PC card eject button.