Filter
Top Products
Setup Utility
7-5
Security Menu
• See the previous chapter about setting passwords.
• In some password settings, you cannot select some items.
Set Supervisor Password Defines the supervisor password (up to eight characters).
Set User Password Defines the user password (up to eight characters). You cannot
set the user password unless you have set the supervisor password.
If you lose your password, you will be unable to access the computer or
change the configuration. Make sure to select a password you will never
forget, or write it down and protect it in a secure place. Otherwise, you
will have to contact your system administrator or service representative
for assistance.
Password on boot Defines whether the system requires passwords during the boot
process. Enabled means that you need to input a password to continue.
Power Management Security Defines whether the system requires a password
when it resumes from the suspend-to-disk mode. Enabled means that you need to
input a password to continue.
Diskette access Specifies who can access the floppy disk drive.
Fixed disk boot sector Defines whether the boot sector of the hard disk is write-
protected. When formatting the hard disk or when reinstalling software, set it to
Normal.