Filter
Top Products
1. Attach all the cables to the back panel.
2. To attach the two-piece cable cover, hold the bottom piece of the cable cover and align the four tabs with the four slots on the computer's back panel.
3. Insert the tabs into the slots and slide the piece toward the diagnostic lights (see the illustration) until it is securely positioned.
4. Grasp the top piece of the cable cover and align the two tabs with the two slots in the computer's back panel.
5. Insert the tabs into the slots and slide the piece toward the diagnostic lights (see the illustration).
6. Install a security device in the security cable slot (optional).
Removing the Cable Cover
1. If a security device is installed in the security cable slot, remove the device.
2. Grasp the top piece of the cable cover and slide it to the left until it stops, and then lift it up and away.
3. To remove the bottom piece of the cable cover, while pressing the lever, slide the piece to the left until it stops, and then lift it up and away.
Mounting Plate
Attaching the Computer to the Mounting Plate
NOTICE: When installing the computer in the hanging orientation, avoid locations where it will be bumped by a user's legs or chair.