Filter
Top Products
Dialogic
®
PBX Integration Board User’s Guide
Step 3: Program the Target Line
In this example, the target line number is Line 145. The following
programming will route the incoming DID call to extension 222, which is a
D/82 port, if the digits 222 are received in the target line 145.
Lines
Show Line -> 145
Trunk/Line Data: press Enter
Target Line: default
Line Type: Pvt to 222 (or Public, both have worked)
Received Digits: 222
Prime Set: None (or 222)
Step 4: Assign the Target Line to the Extension
The extension used in this example is 222, this will be dependent on the KSU.
Terminal & Sets -> Show Set: 222
Line Access
Line Assignment
Show Line
-> 145
Ring only
Prime Line: I/C
Intercom Key: 1
Memory Key Programming
Memory Keys 00, 01, and 03 must be programmed as follows:
• Memory Button 00 - Handsfree/mute
• Memory Button 01 - Intercom
• Memory Button 03 - Transfer (Feature 70)
114