Dialogic M7324 Computer Hardware User Manual


 
4. PBX Systems
4.7.4. Function Keys
There are eight Function keys located next to the dial pad keys in two groups:
FNC, CNF, LNR/SPD, SPKR, and ANS. There is a two-color LED
indicator associated with each of these function keys. The LED indicators
can take one of the states listed in
Table 34.
RECALL, TRF, and HOLD. These keys do not have any LED
associated with them.
Reading LCD Indicators on Function Keys
The Dialogic
®
PBX Integration Board can determine the state of its LED
indicators on the Function keys by using the d42_indicators( ) function to
read the LCD indicators data. This function places the LED indicator data (26
bytes) in an application buffer. Bytes 18-23 (excluding byte 20, which is not
used) contain the LED indicator status for Feature keys (see
Table 37). Refer
to the Dialogic
®
PBX Integration Software Reference for more information
about using the d42_indicators( ) function.
Table 37. Function Key Indicators for the DTerm Series III
Byte Key Description Dial String
18 CNF <ESC>KI
19 FCN <ESC>KL
20 Not used ---
21 LNR/SPD <ESC>KH
22 ANS <ESC>KM
23 SPKR <ESC>KN
TRF <ESC>KG
HOLD <ESC>KJ
RECALL <ESC>KK
157