Filter
Top Products
4. PBX Systems
For SX-2000 PBXs and a SuperSet 430 phone:
a) Press the desired personal key (10 or 11).
b) Press the Change key soft-key.
c) Press the Speed Call soft-key.
d) Enter the MWI Feature Access code (for key 10 – MWI OFF, for 11-
MWI ON).
e) Press the Save soft-key.
f) Press the Superkey.
SX-50 PBX and Mitel Superset 420 Emulation:
Programming Personal Key 02 to Act as an Attendant Console MWI
Key:
1. On a 420 Superset phone, press the SuperKey.
2. Press the No display key until the display screen shows Personal Keys,
then press the Yes display key.
3. Press personal key 02, which is the second key from the bottom right.
4. If the screen shows that personal key 02 is programmed differently than
as the MWI, press the Change display key.
5. Press the No display key until the screen shows: Att. func keys, then
press the Yes display key.
6. After the screen shows Dial feature No, use the keypad to enter the
number 10 for message waiting.
7. After the display screen shows 10 = msg wait, press the Save display key
to confirm and exit.
8. To determine the current setting of a feature key, press the SuperKey and
then press the feature key you want to check. The display shows the name
of the feature programmed.
85