Filter
Top Products
Unloading and Unpacking
16
Figure 12 Location of serial and model number plate (cabinet side panel removed and open door)
3.3 Positioning the Liebert FS
3.3.1 Moving the Liebert FS
When moving the unit a short distance, the Liebert FS may be rolled on its built-in casters (see
Figure 13) to its location.
Figure 13 Liebert FS cabinet caster location
When moving the unit a longer distance or over rough flooring, move the Liebert FS with a forklift or
similar equipment to facilitate the relocation and to reduce vibration of the unit.
3.3.2 Storing the Liebert FS for Delayed Installation
If the equipment will not be installed immediately, it must be stored indoors where the temperature
stays within -4°F to 176°F (-20°C to 80°C) and the humidity is no higher than 95% (non-condensing).
!
CAUTION
Before moving the Liebert FS across a floor, determine whether the surface will support the
unit’s weight—1,462 lb. (663kg) as shipped; 1,300 lb. (590kg) uncrated.
!
CAUTION
Ensure that the handling equipment is rated for the weight of the Liebert FS—1,462 lb.
(663kg) as shipped; 1,300 lb. (590kg) uncrated.
Serial Number
and Model
Number Plates
Manuals
Casters on each corner
(for moving unit short
distances only)
DISCONTINUED
PRODUCT