Filter
Top Products
OVERVIEW
Additional Information
1-4 CC1000dm User’s Manual 10004281-02
1
To obtain a certificate of conformity (CoC) for the CC1000dm, send an e-mail to
sales@artesyncp.com or call 1-800-356-9602. Have the part number(s) (e.g.,
C000####-##) for your configuration(s) available when contacting Artesyn.
Terminology and Notation
Active low signals:
An active low signal is indicated with an asterisk * after the signal name.
Byte, word:
Throughout this manual byte refers to 8 bits, word refers to 16 bits, and long word refers
to 32 bits, double long word refers to 64 bits.
PLD:
This manual uses the acronym, PLD, as a generic term for programmable logic device
(also known as FPGA, CPLD, EPLD, etc.).
Radix 2 and 16:
Hexadecimal numbers end with a subscript 16. Binary numbers are shown with a sub-
script 2.
Technical References
Further information on basic operation and programming of the CC1000dm compo-
nents can be found in the following documents:
Device / Interface: Document:
1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Bridge PCI 6254 (HB6) Dual Mode Universal PCI-to-PCI Bridge Data Book
(PLX Technology, Inc.; Version 2.0 May 2003)
http://www.plxtech.com/
CompactPCI PICMG® 2.0 CompactPCI® Specification/Revision 3.0. October 1, 1999
PICMG® 2.1 CompactPCI® Hot Swap Specification/Revision 2.0 January
17, 2001
PICMG® 2.2 VME64x on CompactPCI® Specification/Revision 1.0 August
7, 1998
PICMG® 2.3 PMC on CompactPCI® Specification/Revision 1.0 August 7,
1998
PICMG® 2.4 IP on CompactPCI® Specification/Revision 1.0 August 7,
1998
(PCI Industrial Computer Manufacturers Group, PICMG; Wakefield, MA)
http://www.picmg.org/
T a bl e 1 - 2 :
Technical References