Filter
Top Products
3.
Move the center support to the center of both edge guides.
When you load paper in the landscape direction, adjust the
center support until you can see the paper size you are
using through the cutout in the center support.
4.
Fan a stack of paper; then tap it on a flat surface to even the
edges. While aligning the paper’s edges with the edge
guides, insert it with the printable surface face down all the
way into the paper feeder until it meets resistance.
Note:
The paperfeeder holds up to
100
sheets (the maximum for 64-g/m’ or
I6-lb. paper). Do not load paper higher than the mark on the edge
guide.
1-14
Setting Up the Printer