Filter
Top Products
Labels
Only use labels mounted on a continuous backing sheet with
tractor sprocket holes. Do not try to print labels on single
sheets; labels on a shiny backing sheet may not feed properly.
You load labels the same way as continuous paper, except you
turn the paper-thickness lever clockwise as far as it will go.
El
Caution:
Ll
Neverfeed labels
backzoard
by pressing the LOAD/EJECT
button. They
call
easily peel off the backing and jam the
printer.
I-1
Ll
c-l
Make sure the tear-off mode is set to
offin
the default
settings mode
when
using labels.
Use labels under normal operating conditions only because
they are sensitive to extreme temperature and humidity.
Do not leave labels loaded in the printer between jobs; they
nmy
jam
zclhen
you resume printing.
To remove labels from the printer, follow the steps below.
1.
Tear off the labels at the rear of the printer.
2.
Press the
LOAD/EJECT
button while holding down the
ALT
button to advance the remaining labels out of the printer.
2-18
Paper Handling