Filter
Top Products
Selecting a
baud
rate
You can select from the following baud rates: 300, 600, 1,200,
2,400, 4,800, 9,600 and
19,200
bps (bits per second). When you
set the baud rate, see the bit-rate selection table in the
C82305*/C82306*
interface card manual.
When the vacant area for data in the input buffer drops to
256
bytes, the printer outputs an X-OFF code or sets the
DTR
flag
to 1 (MARK) to indicate that it cannot receive data. When the
vacant area for data in the buffer increases to
512
bytes, the
printer outputs an X-ON code or sets the
DTR
flag to 0
(SPACE) to indicate that it is ready to receive data.
Error handling
When the printer detects an error, it prints an asterisk
(*).
Maintenance
and
Transportation
Replacing the ink
cartridge
When the
INK OUT
light on the control panel flashes, the ink in
the ink cartridge is low. The printer continues printing until
the cartridge is completely empty. When it is out of ink, the
printer stops and the
INK OUT
light stays on. Printing does not
resume until you insert a new cartridge.
It’s a good idea to keep a spare ink cartridge on hand. Use
Epson ink cartridge SO20025 to ensure proper operation and
preserve the life of the print head. Other brands of ink may
clog the print head or damage it.
Follow these steps to remove the empty cartridge:
3-18
Using the Printer