Filter
Top Products
D
You can switch to single sheets without removing the
paper supply from the push tractor. For instructions, see
“Switching to single sheets” later in this chapter.
Q
You can use the printer’s micro-feed feature to adjust the
position, just as when you load single sheets. The printer
remembers this new position even after you turn it off. See
page
2-3.
When you turn on the printer with paper loaded, it
reverses the paper to the paper-park position and then
advances it to the next page. To keep the loading position
accurate, remove any printed sheets before you turn off
the
printer .
Using the tear-off feature
After you have finished printing, you can use the tear-off
feature to advance paper to the tear-off edge of the printer. You
can then easily tear off printed sheets. When you resume
printing, the printer feeds paper back to the loading position.
This feature lets you save paper that would normally be lost
between documents.
To use the tear-off feature, turn the tear-off mode on using the
default-settings mode as described in Chapter
3.
The printer advances paper to the tear-off position only when
the printer receives a full page of data or a form-feed command
and no more data is received for three seconds.
I
Caution:
1
Never use the tear-offfeature with labels. When fed
backward, labels may come off the backing and jam the
printer.
U
When you use labels,
alzuays
turn the tear-off mode off
using the
defrzult-settings
mode.
2-12
Paper Handling