Filter
Top Products
q
Caution:
U
Never use alcohols or
fhimers
to clean the prinfer; these
chemicals cm damage the components as well as the case.
ELI
Be careful roof to get wafer
on
the prinfcr mechanism or
clectrotzic
components.
‘J
Do not
use
a hard or abrasive brush.
NJ
Do not spray the inside
(If
the printer with lubricants;
umuitable
dils
cau
damage the
mchanism.
Contact your
dealer or a qual$ied service person if lubrication is needed.
Transporting the printer
If you need to transport your printer some distance, carefully
repack it using a box and enough packing materials to prevent
damage to your printer, as described below:
1.
Open the printer cover and make sure that the print head is
capped in the far right position. If it is not capped, turn on
the printer to cap it. Then, turn off the printer.
2.
Remove the paper separators from the printer. Then, remove
the paper support.
3.
Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
4.
Remove the paper from the paper feeder and attach the
protective material to the printer. Repack it in a box.
q
Caution:
3 Do
mf
renmue
the ink cartridge when you tramport your
printer.
‘-I
Keep the printerflat in the box during transport.
If the print quality is poor after transport, clean the print head.
See “Cleaning the Print Head.”
Using the Printer
3-21