Filter
Top Products
Adjust your top-of-form position with the micro-feed feature
to get half of the margin at the bottom of one page and half at
the top of the next page.
Network interface mode
If your printer is connected to a single computer, leave this
feature off. If you want to use the printer in a network
environment and share it among multiple computers, set this
feature to on.
Note:
When this feature is set to on, data may be present in the printer‘s
buffer even though the printer is not continuously printing. Always
make sure the DATA light is off before turning off the printer.
Mixed text/graphics mode
This feature is for software that has problems printing scalable
font text combined with graphics. Leave the mixed
text/graphics mode set to off if you don’t notice any problems
in your printout.
Auto line feed
When the auto line feed feature is on, each carriage return (CR)
code is accompanied by a line feed
(LF)
code. If your printed
text is unexpectedly double-spaced, set this feature to off. If
text lines print on top of each other, set it to on.
Auto interface selection
This feature is necessary when an optional interface card is
installed and interface cables are connected to both the parallel
interface and the optional interface card.
3-10
Using the Printer