Filter
Top Products
4.
Lower both sides of the page eject guide.
5.
Insert an envelope with the wide end entering the printer
first, printable side face-up, until it meets resistance. The
printer then loads the envelope to the print position.
6.
Send data from your computer. The printer ejects the
envelope when it finishes printing.
Note:
Make sure
your software keeps the printing entirely within the
printable area of the envelope. See the Appendix for details.
Use envelopes only under normal operating conditions.
lf
the ink is not dryingfast enough,
try removing envelopes
one at
a time as they finish printing.
To
switch back to the paper feeder, turn the paper-thickness
lever counterclockwise as far as it will go. Then press the
LOAD/EJECT
button to load from the paper feeder.
Paper Handling
2-17