Filter
Top Products
1.
If any printed sheets remain in the printer, tear off the
printed pages.
2.
Press the
LOAD/EJECT
button. The printer feeds the
continuous paper backward to the paper-park position.
R
Caution:
U
Always tear offpaper before back-feeding; back-feeding too
many sheets can cause a paper jam.
0
Nezler
back-feed labels. Labels call easily come
qf
their
backing and jam the printer.
3.
Move the release lever to the single-sheet position.
Note:
If
the
prilz
ter
beeps, raise the release lever and press the LOA D/EJECT
button to
feed
the paper
backwnrds
to the paper-park position. You can
thcrz
lower the lever again.
4.
Attach the paper separators as shown on page l-6.
5.
The printer is ready to print. When it receives data, it loads a
single sheet from the paper feeder or manual feed slot.
Switching
to continuous paper
To switch from single sheets back to continuous paper, follow
the steps below.
1.
If a single sheet is in the paper path, press the
LOAD/EJECT
button to eject it.
2.
Raise the release lever to the continuous-paper position.
Note:
lf
the
pri/l
ter
beeps, lower the release leuer and press the
LOAD/EJECT button to eject the paper. Then raise the lever again.
Paper Handling
2-15