Filter
Top Products
When Setup asks for the name of the drive and directory to
contain the driver files, erase the default name and enter the
directory containing your AutoCAD 2.62 program files.
2.
Before running AutoCAD, you must load the display driver
into the computer’s memory. First, log onto your AutoCAD
directory. Then type the display driver filename at the MS-
DOS command prompt and press Enter. (The display driver
filenames are listed at the beginning of this section.) For
example, to load the 1024 x 768, 16-color graphics driver
into memory, type the following and press Enter:
D2V1768
Installing the driver in the AUTOEXEC.BAT file
You can install the driver automatically each time you turn on
or reset your computer by placing the command in your
AUTOEXECBAT file. Follow these steps:
1.
Type C : \ and press Enter to log onto the root directory of
your hard disk.
2.
Type the following and press Enter:
COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT
3.
Type the driver name (such as D2V17 68) and press Enter.
4.
Press
F6
and then
Enter.
Configuring AutoCAD
The first time you use AutoCAD with the driver, you need to
configure it for an ADI display. Follow the steps below:
1. Select Configure AutoCAD from the AutoCAD
main menu.
Using the VGA Utilities
A-17