Filter
Top Products
Note
4.
After you highlight the appropriate display adapter type,
press Enter. The screen displays your new setting.
5. Highlight
* * * SAVE SETTING
* * * and
press
Enter
to return to the main Setup menu.
Setting the Power-on Password
A power-on password is a feature that lets you control who can
access your system. However, you do not need to set a power-on
password to use your computer. If you do not want to set a
password, skip this section.
Once you set a power-on password, you must enter it at the key
prompt ( ) every time you turn on or reset your computer.
If you cannot enter it correctly, the computer does not respond
to your keyboard entries. Therefore, if you set a power-on
password, be sure to remember it or write it down and keep it in
a safe place.
If you want to use your computer as a network server, you can
set your password to operate in network server mode. (See
“Using Your Computer as a Network Server” in Chapter 4 for
more information.)
Running the Setup Program
2-9