Filter
Top Products
13. Type the filename of the driver you want to use and press
Enter.
14. Press M to return to the main menu.
15. Select option 7 to save the new setup and exit from the
program.
WordStar, Version 3.3
Your computer’s built-in VGA adapter can run WordStar,
version 3.3, in 132-column text mode without a special driver.
However, you do need to install the VGAMODE utility
program (described later in this appendix). Also, once you have
installed WordStar on your hard disk, you need to install a patch
(modification) to the WordStar program file, as described below.
Installing the Patch
To install the patch to the WordStar program, follow the steps
below:
1.
Log onto the WordStar directory on your hard disk.
2.
Type the following and press Enter to make a backup copy
of the original WordStar program file:
COPY WS.COM WSORIG.COM
3.
Run the VGA Driver Setup program on your Utility 1
diskette to copy the WS33INST utility to your hard disk.
From the Main Menu, select Utility
programs.
Then select WS33INST from the submenu. See “Using
the VGA Driver Setup Program” on page A-4 for
instructions.
Using the VGA Utilities
A-39