Filter
Top Products
WordPerfect, Versions 4.0 and 4.1
Your VGA adapter can run versions 4.0 and 4.1 of WordPerfect
in 132-column text mode without a special driver. However, you
do need to install the VGAMODE utility (described later in this
appendix) and reconfigure WordPerfect.
After you have installed WordPerfect on your hard disk, follow
these steps:
1.
Install the VGAMODE utility, if you have not already done
so. See “VGAMODE Utility” on page A-57 for instructions.
2.
Log onto the WordPerfect directory on your hard disk.
3. Type the foll
owing and press Enter to start VGAMODE
and initialize 132-column text mode:
VGAMODE 132, 25
4.
Type the following and press Enter to run WordPerfect’s
Setup program:
WP /S
5. At the Setup Menu, select Specify Screen Size.
6.
Type 132 to edit the number of columns field.
7.
Exit the Setup Menu. Your computer now displays
WordPerfect in 132-column text mode.
8.
To use the full width of the screen, you must change the
margins. (See the WordPerfect documentation for
instructions.)
Using the VGA Utilities
A-43