Filter
Top Products
Resuming From an Error
If an error occurs during a test, the test stops at that point, and
an error code and error message appear. If you want to record the
problem, you can print out the message on your printer. You see
this prompt:
Do you want a printout of the error
message(s) ? (Y/N)
To
continue
without printing the error message, select
N.
Before you request a printout, be sure your printer is ready and
contains paper. Then select Y. If the printer is not ready, the
following message and prompt appear:
Printer is not installed correctly.
Install correctly before entering.
Continue ? (Y/N)
Correct the problem and select Y to continue printing, or select
N to cancel printing.
After printing the error message, the program displays this
prompt:
Printout is finished. Press ENTER to
return to the menu.
The program continues after an error in one of the following
ways:
❏
It returns to the Device List, or
❏
If you are running multiple tests and are not terminating on
an error, the program repeats the test that caused the error.
E-8
Performing System Diagnostics