Introduction
This
Equity® 386/33 PLUS User’s Guide
contains the information
you need to get the best results from your computer. You’ll find
instructions for adding options to your system such as disk
drives, option cards, or a math coprocessor, as well as general
reference information such as how to use diskettes, test your
system, and troubleshoot minor problems.
Note
For instructions on setting up your system or changing the
SETUP configuration, see the Setup Guide.
You don’t have to read everything in this book. Its contents are
summarized below:
Chapter 1 covers general operating procedures, such as using
and caring for disks and disk drives.
Chapter 2 describes special features you can use to enhance
your system’s performance.
Chapter 3 tells how to remove and replace the computer’s
cover and subassembly to reach internal components.
Chapter 4 describes some of the options you can use in your
computer and instructions for setting jumpers, replacing the
battery, and installing options.
Chapter 5 explains how to install and remove disk drives.
Appendix A lists the specifications of your computer,
Appendix B covers the system diagnostic tests you can run, and
Appendix C contains troubleshooting tips.
At the end of this manual you’ll find a glossary and an index.
Introduction 1