4. Locate one of the power supply cables that lead from the
power supply in the computer (behind the horizontal drive
bays). The cables are labelled P1, P2, or P3 and have a clear
plastic connector on one end. One cable is already attached
to the diskette drive; you can use either of the remaining
two cables. As shown below, the end of the connector has
two notched comers.
power supply cable
power supply socket
notched corners
notched corners
The power supply socket is on the back of the hard disk
drive, next to the ribbon cable you just connected. The
socket also has two notched comers, as shown above.
Pulling the power supply cable through the lower opening
on the right side of the subassembly makes it easier to reach
the socket on the drive.
Installing and Removing Disk Drives
7-15