Filter
Top Products
Note
If you are using the keyboard that came with your computer
(or another IBM AT compatible keyboard), the default for
the initial num lock setting is
ON.
If you are using a keyboard
that has 83 or 84 keys, the initial num lock default setting is
OFF.
The keyboard repeat rate option lets you change the speed
at
which your keyboard repeats a character when you hold down a
key. The default setting is
Normal,
but you can make the rate
faster or slower.
Follow these steps to check or change the speaker and keyboard
options:
1.
2.
3.
4.
At the main Setup menu, highlight
Keyboard/Sound.
The current settings appear:
Speaker
Enabled
Initial num lock
ON
KB repeat rate
Normal
If the displayed settings are appropriate for you, skip this
section.
To change any of the settings, press
Enter.
The cursor block
moves into the submenu and the
Speaker
option is
highlighted.
To enable or disable the speaker (turn it on or off), press
Enter.
To turn the initial num lock setting
on or
off, highlight
Initial num lock
and press
Enter.
Running the Setup Program
2-15