Filter
Top Products
7.
You must set a power-on
password
to turn on network server
mode. If you did not yet enter a password, this message
appears:
Set a power-on password first
To enter a password, highlight
Power-on password
and follow steps 3 through 5 above.
After you enter a powere-on password and turn network
server mode on or off, highlight
* * * *
SAVE
SETTINGS ****
and press
Enter
to return to the main
Setup menu.
Note
If you forget your password, there is a way to disable the
password function. See “Password Problems” in Appendix A
for instructions.
Setting the Memory Caching
Memory caching allows your system to work much faster. When
you cache memory, the computer copies information from
memory into a high-speed cache buffer. Your system can find
information more quickly in the cache buffer than when it looks
for it in the system memory. This greatly improves the speed at
which your system performs.
Note
Caching is active only when your computer is operating at
20 MHz (high) speed.
The Setup program allows you to enable or disable memory
caching. The default setting is enabled for all the memory
currently installed in your system.
Running the Setup Program
2-11