Filter
Top Products
Next time
you
turn on
the computer
or press
RESET,
use the
new password.
Deleting a Power-on Password
To delete your power-on password, follow these steps:
1.
If you do not have a hard disk, insert your MS-DOS Startup
diskette in drive A.
2.
Turn on the computer or press
RESET.
At the key prompt,
enter your current password followed by a forward slash. For
example, if your password is
123, type:
123/
3.
Press
Enter.
A happy face character appears and then the
computer loads MS-DOS.
The next time you turn on the computer or press
RESET,
it does
not request a password and loads MS-DOS immediately.
Note
You need to know the password in order to delete it using this
method. If you do not know the password, see “Password
Problems” in Appendix A.
Using Your Computer
3-9