Filter
Top Products
If
the program
finds errors, the screen displays a table
of the
tracks
that
gave errors, similar to the one the Destructive surface
analysis displays.
After the status reports, you see this message:
Press ENTER to return to the menu.
Check the information displayed.
Then
press
Enter
to return to
the Hard Disk Format Menu.
Exiting the Hard Disk Format Menu
To leave the Hard Disk Format Menu, select
0 -Exit. The
screen displays the Operation Menu.
If you formatted the hard disk with option 1 or 2, you must now
install MS-DOS (or another operating system) on the hard disk
to prepare it for use. Remove the Reference diskette from
drive A and then follow the instructions in your MS-DOS
Installation Guide. The installation process automatically
partitions and formats the hard disk.
If you only ran the Non-destructive surface analysis, remove the
Reference diskette from drive A and press the
RESET
button to
load MS-DOS.
Physically Formatting a Hard Disk
B-13