How to Use This Manual
This manual explains how to set up and operate your
computer, install options, and run diagnostics checks. The
illustrations show a computer with a 51/4-inch diskette drive, but
instructions for using a 3½-inch drive are also included.
Note
Although this manual provides tips for using MS-DOS, it
does not explain how to use an operating system. See your
operating system manuals for comprehensive instructions on
installing and using the operating system.
You do not need to read everything in this book; see the
following chapter summaries.
Chapter 1 provides simple step-by-step instructions for setting
up your system. On the back cover foldout are illustrations
showing the different parts of your computer; refer to these as
you set up your system.
Chapter 2 describes how to run the Setup program to define
your computer’s configuration. Do this before you use your
computer. You may need to do it again later if you change the
configuration.
Chapter 3 provides instructions for important operating
procedures, such as using and caring for disks and disk drives.
Chapter 4 describes specialized features you can use to enhance
your system’s performance.
Chapter 5 contains instructions for removing the cover and
subassembly and then replacing the subassembly and cover.
Chapter 6 describes some of the options you can use in your
computer and contains instructions for setting jumpers and
installing options.