Filter
Top Products
1.
At the main Setup menu, highlight
Display.
A submenu
appears identifying the current display adapter type, such as
the following:
VGA
If the display adapter type is correct for your system, you can
skip this section.
2.
To change the display adapter setting, press
Enter.
The
cursor block moves into the submenu and you see an
additional menu on the right side:
CGA
40 column
CGA
80 column
Monochrome
80
column
EGA,MCGA,VGA or other
Remap VGABIOS at C000
3.
Press
Enter
to move the cursor block into this submenu and
then use
T
or
J
to highlight the option that matches your
display adapter type. If you are not sure which one to
choose, follow these guidelines:
0
If you are using the built-in VGA adapter or have
installed a VGA, EGA, or MCGA card, select
EGA,MCGA,VGA or other.
Q If you have a color graphics adapter (CGA) or a multi-
mode graphics adapter (MGA) attached to an RGB
(color) monitor, select CGA 80 column. (Also set
the color/mono switch on the MGA card to color.)
Running the Setup Program
2-7