Filter
Top Products
Continuing From an Error Message
If your computer has never been
set up, you may see an
error
message and prompt(s), such as the following:
162 -
System options not set
(Run SETUP in REFERENCE DISK)
(Resume = "F1" key)
If you see an error message like this one, follow these steps:
1.
Press F1. The computer beeps and the screen displays an
error message and prompt, such as the following:
Error(s) detected
+
Incorrect configuration
Set default value ? ( Y / N )
The error message beside the diamond indicates the
condition causing the error. There may be more than one
error listed in the message. Here are some of the error
messages you may see:
Time is invalid
HDD and/or HDC failed initialization
Memory size is incorrect, correction made
Cacheable range is adjusted
Incorrect configuration
Checksum is incorrect
HDD is incorrect
Some errors, such as
Time is invalid,
do not allow
you to set a default value, so the screen does not display the
Set
default value
prompt. If you see one of these
errors, press
E
SC
;
the screen displays
the main Setup menu
so you can enter a new setting.
2-4
Running the Setup Program