Filter
Top Products
TI Model 855 Printer WP Emulation 5-16
Vertical Motion Commands
Vertical tab stops define the line numbers at which the paper stops
when performing vertical tab operations. After vertical tab stops
have been set, any change of the vertical pitch causes a proportional
change in the vertical tab stop positions.
Line Feed
Control character: LF
Hexadecimal: 0A
This command moves the paper forward one line position without
performing a carriage return. The VMI determines the distance from
one line to the next.
Form Feed
Control character: FF
Hexadecimal: 0C
This command advances the paper to the top margin of the next page
and causes the printer to perform a carriage return to the left margin.
Tab Vertically
Control character: VT
Hexadecimal: 0B
This command advances the paper to the next print line without
performing a carriage return.
Tab Vertically Absolute
Escape sequence: ESC VT n
Hexadecimal: 1B 0B n
This command moves the paper vertically (up or down) to the line
specified by the variable n. The line space is the distance defined by
the VMI or the distance set by the operator via the Form Config
switch. The valid range of n is 1 through 126.