Filter
Top Products
TI Model 880 Printer Emulation 4-23
Set Vertical Tab Stops
Escape sequence: ESC [ N1...N16 v
Hexadecimal: 1B 5B N1...N16 76
Escape sequence: ESC 1 n1...n16 NUL
Hexadecimal: 1B 31 n1...n16 00
These commands set vertical tab stops at the lines specified by the
variables N1 through N16 or n1 through n16, where each of the
variables N1 through N16 or n1 through n16 can be any value in the
range of 0 through 113. The command ESC 1 n1...n16 NUL also
clears all previously set tab stops.
Set Vertical Tab Stop at Current Position
Escape sequence: ESC J
Hexadecimal: 1B 4A
Clear All Vertical Tab Stops
Escape sequence: ESC [ 4 g
Hexadecimal: 1B 5B 34 67
Clear Vertical Tab Stop at Current Position
Escape sequence: ESC [ 1 g
Hexadecimal: 1B 5B 31 67
Character Pitch Commands
Character pitches of 5, 8.3, 10, 12, and 16.7 characters per inch (cpi)
are available in the Model 880 emulation mode.
Set Character Pitch to 5 cpi
Escape sequence: ESC P I ESC \
Hexadecimal: 1B 50 49 1B 5C
Set Character Pitch to 8.3 cpi
Escape sequence: ESC P J ESC \
Hexadecimal: 1B 50 4A 1B 5C