Filter
Top Products
TI Model 855 Printer DP Emulation 6-12
This command advances the paper to the top margin of the next page
and causes the printer to perform a carriage return to the left edge
(column 1), as set via the form configuration menu.
Tab Vertically
Control character: VT
Hexadecimal: 0B
This command advances the paper to the next vertical tab stop. If no
vertical tab stops have been set, the VT command causes the printer
to perform a line feed operation. If the printer receives a VT command
following the last vertical tab stop on a page, the printer performs a
form feed operation.
Move Up One-Half Line
Escape sequence: ESC ^
Hexadecimal: 1B 5E
This command moves the paper in reverse one-half of one line space.
The line space is the space defined by the LPI menu item of the
control panel Form Config switch. This sequence can be used for
superscripts or to return to the normal print line after invoking the
ESC v (move down ½ line) sequence.
Move Down One-Half Line
Escape sequence: ESC v
Hexadecimal: 1B 76
This command moves the paper forward one-half of one line space.
The line space is that defined by the LPI menu item of the control
panel Form Config switch. This sequence can be used for subscripts
or to return to the normal print line after invoking the ESC ^ (move
up ½ line) sequence.