Filter
Top Products
Printer Setup 2-6
TI 880 Emulation
The TI 880 emulation submenu contains a group of setup parameters
that can be set to either on or off. These parameters determine how
your printer responds to certain commands from the host computer.
Execute Commands
When on, this parameter enables the printer to respond to escape
sequence commands from the host computer. The default setting is ON.
Line Feed and Carriage Return Upon Receipt of LF
When on, this parameter causes the printer to perform both a line
feed (LF) operation and a carriage return (CR) operation upon
receiving an LF command from the host computer. The default
setting is OFF.
ProPrinterTI855TI880 Epson optional Hexdump
Execute
Commands
LF/CR
ON LF
LF/CR
ON CR
CR W/LF
VT DC2
SO=
Expand
Proc Mode Auto LF Auto LF
Auto LF Auto CR
Graphics
Slashed 0’s
Auto CR
Slashed 0’s
ON
DP
NO
NO
NO
NO NO
NO
NO
OFF
OFF
YES
WP
YES
YES
YES
YES
YES
YES
Emulation
OFF
ON
ON
ON
OFF
ON
emulation mode submenu
OFF
OFF
OFF