Filter
Top Products
Epson FX Printer Emulation Mode 8-9
Epson FX Emulation Commands (concluded)
Command Command Name
Raster Graphics
ESC K n1 n2 Select 60 dpi Graphics
ESC ^ NUL n1 n2 Select 9-Pin 60 dpi Graphics
ESC L n1 n2 Select 120 dpi Graphics
ESC ^ SOH n1 n2 Select 9-Pin 120 dpi Graphics
ESC Y nl n2 Select High-Speed, 120 dpi Graphics
ESC Z n1 n2 Select 240 dpi Graphics
ESC * m n1 n2 Select Graphics Mode m
ESC ? s n Reassign Graphics Mode
Epson FX Emulation Command
Descriptions
The following paragraphs describe the Epson FX emulation commands.
The command formats are listed following each command description.
Many of the escape-sequence commands contain one or more
variables to specify various command parameters. These variables
are italicized in the command formats to indicate that they can be set
to more than one value.
Printer Operation Commands
The printer operation commands provide printer control functions
including printer selection and initialization. These commands allow
the host computer to control the basic printer functions.
Note: For clarity, the individual terms of each escape sequence are
separated by spaces throughout this chapter. When you enter these
commands, you must omit these spaces.