Filter
Top Products
Printer Setup 2-17
Graphics Printing Mode
The BI-DIR GRAPHIC parameter lets you choose whether the
printer prints graphics bidirectionally or from left to right only. The
default setting is NO (print graphics from left to right only).
LCD Language
The LCD LANG parameter lets you set the control panel LCD to
display its messages in English, French, German, or Spanish. The
default setting is ENGLISH.
Paper Out Equals Busy
The PAPER OUT = BUSY parameter, when set to YES, lets the
printer send a busy condition signal to the communication interface
when the printer runs out of paper. The default setting is YES.
Limiting Control Panel Operation
This parameter enables you to select three levels of control panel
functioning, intended to limit operator access to certain printer
function. This effectively prevents operator error resulting from
incorrect control panel operation. The menu offers four choices from
Level 0 (factory default) to Level 3.
Level 0 is conventional, full control panel operation.
Level 1 permits full offline control panel operation, but when the
printer is online only the Online and Clear Error keys function.
Level 2 limits online operation to the Online and Clear Error keys
and, when offline, disables the Form Config, Pitch, Quality, Font,
and Setup/Test keys.
Level 3 limits online operation to the Online and Clear Error keys
and, when offline, disables the Form Select, Form Config, Pitch,
Quality, Font, and Setup/Test, and Form Feed keys.