Filter
Top Products
Epson FX Printer Emulation Mode 8-19
Set Horizontal Tab Stops
Escape sequence: ESC D n1...n32 NUL
Hexadecimal: 1B 44 n1...n32 00
This command clears all previously set horizontal tab stops and sets
a new tab stop at each of the columns specified by the variables
n1...n32. Each of the variables n1 and n2 can be any value in the
range of 1 through 127 for a 7-bit character set and 1 through 232 for
an 8-bit character set. These variables must be listed in ascending
order; that is, the value of each variable must be greater than the one
preceding it. Any n value of 0 or less than that of the one preceding it
terminates the command.
At power-up or upon receiving the Initialize Printer command, the
printer automatically sets a horizontal tab stop at every eighth
column. These are the default positions.
Clear All Horizontal Tab Stops
Escape sequence: ESC D NUL
Hexadecimal: 1B 44 00
Vertical Motion Commands
The vertical motion commands are those that control the vertical
movement of paper within the printer. This set of commands includes
commands that allow you to select any of eight vertical tabulation
channels (VTCs) and set up to 16 vertical tabs for each channel.
Line Feed
Control character: LF
Hexadecimal: 0A
This command causes the printer to print the current receive buffer
contents and then position the printhead at the next print line.