Filter
Top Products
TI Model 855 Printer DP Emulation 6-17
To provide compatibility with TI 857 where n is an ASCII value
NUL through ACK (hexadecimal value 00 through 06 or decimal
value 0 through 6).
n = 0 for black
n = 1 for blue
n = 2 for red
n = 3 for yellow
n = 4 for green
n = 5 for purple
n = 6 for orange
Raster Graphics Commands
The following paragraphs describe the commands that control the
raster graphics feature in the Model 855 DP emulation mode. To find
the values of n1 and n2 for any of the following commands, modify
the procedure described for the Select 60 dpi Graphics command in
Chapter 4. In step 1 of the procedure, substitute the appropriate dot
density value for 60.
Select 60 dpi Graphics
Escape sequence: ESC K n1 n2
Hexadecimal: 1B 4B n1 n2
Select 72 dpi Graphics
Escape sequence: ESC N n1 n2
Hexadecimal: 1B 4E n1 n2
Select 120 dpi Graphics
Escape sequence: ESC L n1 n2
Hexadecimal: 1B 4C n1 n2
Escape sequence: ESC J n1 n2
Hexadecimal: 1B 4A n1 n2
Select 144 dpi Graphics
Escape sequence: ESC O n1 n2
Hexadecimal: 1B 4F n1 n2