Filter
Top Products
TI Model 880 Printer Emulation 4-21
Set Horizontal Tab Stop at Current Position
Escape sequence: ESC H
Hexadecimal: 1B 48
Clear Horizontal Tab Stop at Current Position
Escape sequence: ESC [ 0 g
Hexadecimal: 1B 5B 30 67
Vertical Motion Commands
Vertical tab stops define the line numbers at which the paper stops
when performing vertical tab operations. After vertical tab stops
have been set, any change of the vertical pitch causes a proportional
change in the vertical tab stop positions.
Line Feed
Control character: LF
Hexadecimal: 0A
For either of the following conditions, this command causes the
printer to print the current line, advance the paper one print line, and
perform a carriage return.
q The printer is configured to perform a carriage return upon
receiving an LF control character.
q If the printer is not configured to comply with this condition, LF
causes the printer to print the current line and advance the paper
one print line without performing a carriage return.
Form Feed
Control character: FF
Hexadecimal: 0C
This command causes the printer to print the current line, advance
the paper to the first print line of the next form, and position the
printhead at the left margin.