Filter
Top Products
Optional Emulation Commands 9-2
Introduction
This chapter describes the optional DEC LA120 emulation mode. An
optional emulation mode is selectable from the printer setup menu
described in Chapter 2 or by global commands described in Chapter 3.
DEC LA120 Emulation Commands
This mode enables your printer to emulate most of the functions of
the DEC LA120. Your printer, when operating in the DEC LA120
emulation mode, can respond to both escape-sequence commands
and the standard US ASCII control characters. The following table
lists the DEC LA120 printer commands.
DEC LA120 Commands
Command Command Name
Printer Operation
BEL Sound Bell
BS Back space
CR Carriage Return
DC1 “Ready” Signal - Serial Communication
DC3 “Busy” Signal - Serial Communication
FF Form Feed
LF Line Feed
HT Horizontal Tab
VT Vertical Tab
ESC [ 20 h Enable auto line feed
ESC [ 20 l Disable auto line feed
ESC [ 0 c or ESC [ c Product ID Request (transmit response is ESC [ ? 2 c)
CAN Line Cancel
ETX Used with ETX/ACK Busy Protocol
ENQ Enquiry: Transmit Answerback Message
NUL or DEL No Operation (fill character)